picking bathroom fixtures

If you’re about to do some bathroom remodeling, there are a number of important decisions you have to make before you get started. Things like how much space you have available for replacement bathroom fixtures, your budget, and the types of fixtures you want to install will help you figure out how much work you’ll need to do.

Most of the work involved in bathroom remodeling is centered around fitting the fixtures into the space. If you can find some space that’s free, most bathrooms are no problem because you can hang your existing fixtures in their places.

If you don’t have a lot of room available, then you’ll need to take a look at the space that’s available for replacement in your bathroom. You can remove and replace the existing fixtures with newer ones, or you can put in a new sink, toilet, and faucets.

You might want to add additional lighting, or maybe you’d prefer to get a cabin vanity unit that incorporates a wall-mounted mirror. While it may be helpful to have a bathroom designer walk you through the possibilities, most bathroom remodeling problems can be easily addressed by yourself.

One of the first decisions you have to make when doing bathroom remodeling is whether or not you want to keep the old fixtures or if you want to replace them with new ones. Some people like the idea of having everything from the same company and can work with the same manufacturer that produced the existing fixtures.

Even if you’re looking to purchase new ones, it might be worth your while to consider upgrading your existing bathroom lights so that they fit better with the new ones you’re going to buy. Your old lights are probably made from incandescent bulbs, which get dimmer over time.

If you’re buying new ones that are efficient, you might want to use ones that’re made from CFL bulbs. They usually last about twice as long as their standard-size counterparts.

Bathrooms also tend to be cold rooms during the winter. When choosing bathroom fixtures, don’t forget to factor in the furnace costs you’ll incur for heating up the water.

You can install a new heat pump system to replace your old one. The most commonly used type of such systems are the ones that are located in the toilet area, which are known as under-mount systems.

You can still use your old bathroom fixtures if you like, but you should keep a close eye on the color of the paint and the upholstery that surrounds the walls. Since the original installation was done before the paint was applied, you can pretty much ignore the color.

While most bathroom remodeling is left to the professionals, you should be careful not to do anything that might cause damage to the walls, ceiling, or fixtures. It’s a good idea to consult a professional first if you’re not sure what you’re doing.

Finally, you’ll also want to check with your homeowners’ insurance company before you start bathroom remodeling. While it’s not a good idea to begin an expensive job without insurance, it’s still a good idea to get it through the insurance company, just in case.